LAUNCH X431 ECU & TCU Programmer has been confirmed and can be used to clone BOSCH MED17.8.10 ECU. The following is feedback from a user:
I recently delved into the world of ECU programming and had an exhilarating experience with the Launch X431 ECU Programmer clone. Specifically, I successfully tackled the BOSCH MED17.8.10 TC1728 ECU on the bench, and the process was a breeze, without the need for the X431 tablet. In just 2 or 3 minutes, I had the job done with ease, thanks to the user-friendly interface and detailed wiring diagram within the software.
1. Seamless Device Connection:
To kick things off, I connected the X431 ECU Programmer to my computer using a USB cable. Once the connection was established, I fired up the X-431 ECU & TCU Programmer software. To quickly locate the specific ECU model, I input "med17.8.10" into the search box, and voila – I found the GreatWall Hover 62014-2018 TGI 1497 164 MED17.8.10 HW2_TC1728.
Double-clicking on the ECU brought me to the main operation interface, where I accessed the wiring diagram with a simple click on "Direct connection of diagram." Following the diagram meticulously, I connected the X-431 ECU Programmer and the Bosch MED17.8.10 ECU with the BENCH mode line, ensuring a proper connection. Of course, don't forget to connect the power supply to the programmer as well.
2. Reading and Writing Bosch MED17.8.10 ECU:
Read Chip ID
Read Original EEPROM Data
Read Original FLASH Data
Once the original Bosch ECU data was securely backed up, I disconnected from the ECU.
Following these steps, I replicated the process for the new Bosch ECU, reading and saving the necessary data(Backing up is a good habit to prevent the ECU from becoming bricked).
Subsequently, I uploaded the corresponding files to write into the new Bosch ECU, patiently waiting for the operation to reach completion.
In Conclusion:
The Launch X431 ECU Programmer clone, coupled with BOSCH MED17.8.10 TC1728 ECU, proved to be a reliable and efficient solution. The user-friendly interface and the availability of a comprehensive wiring diagram made the entire process straightforward. It's worth noting that the LAUNCH X431 X-PROG3 with PC Adapter can also perform this function seamlessly.
For those keen on exploring ECU programming without the need for an X431 tablet, this setup provides a commendable option.