X431 Mega Sale Ship From EU/UK V10.95 Launch X431 GIII X-PROG 3 Chip Reader + 2 Years IMMO Function Activation Service

Product Description

• LAUNCH Official authorized dealer, 100% original
• Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
• Supported models: 60+ brands in America, Europe and Asia.  More models and systems continue to be updated.
• Supported brands: VW, AUDI,Porsche,SKODA, SEAT, BMW, MERCEDES BENZ, TOYOTA, Opel, Renault, PSA, Fiat and more continue to be updated
• For advanced key programming, you can check optional extended IMMO software, all vehicle manufacturers will be available (over 100 other brands).
• X-431 GIII X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read and write keys to the vehicle.
• Compatible with Multiple X-431 Series Diagnostic Tablet (X431 CRP919E BT, X431 CRP919X BT, PRO Elite, X-431 V, X-431 V+,X431 PRO3, X431 Pro5, X431 ProS, X431 Pro3s+,X431 PAD III, X-431 PAD V, X-431 PAD VII, Immo PAD, Immo Pro, Immo Plus，Immo Elite, X-DIAG Pro3 etc)

• Supports MQB.
• All-in-One Key Programmer. Integrates Multiple Function Models.
• Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
• Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
• Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
• Update VAG MQB NEC35XX D70F3524, D70F3525, D70F3526, D70F3529, D70F3532, D70F3537 add key & all keys lost NEW!!!
• X-PROG 3 enables reading and writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.
• X-PROG 3 enables anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement.
• More than just key programming — The LAUNCH XPROG 3 also supports advanced coding/programming functions: - ECU replacemetn for 4TH Generation Audi (0AW/0B5) gearboxs. - Reading, writing & cloning of the ECU for 4TH Generation VW UDS engines. - BMW E chassis 8HP gearbox ECU program wiping,.etc.

• Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
• Supports the BMW CAS4/ CAS4+ module replacement.
• Supports the ECU cloning and replacement for BMW Siemens engines.
• Supports ECU replacement for the fourth-generation of VW/AUDI engine;
• Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
• Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
• Erase the password for Mercedes-Benz engine and gearbox within 3S.11.
• Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
• Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
• Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
• Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

• To check detail X-PROG3 Immobilizer key programming list, check list on the official website.

2 Years IMMO Function Activation Service For Launch X431 Scanner

• Compatible For Device X431 CRP919E BT, X431 CRP919X BT, PAD V ELITE, PAD VII ELITE , X431 Pros Star, Launch X431 Pro5, PRO TT, PR03 ACE, Pros Elite,  Pro Elite, Pro3 V5.0 (V+ V5.0), PROS5.0,  Pro3S+ V5.0, PRO DYNO,PRO3 APEX, PAD II,PAD V, ect
• After activation, Those Scanner will have the same immobilizer function as X431 IMMO Plus or IMMO Elite. 
• IMMO Function Activation For 2 Years, More cost-effective

Note:

• No real shipping. Provide the serial number to us to confirm and activate license.

When Did You Need To Add Launch X431 IMMO Function ?

• Launch X431 PAD or Pro with X-prog3 has less immo function than X431 IMMO Plus or IMMO Elite  IMMO versions. The IMMO specific versions have a higher level of IMMO software but the non IMMO versions (X431 PAD VII/ PRO5/ PAD V/ PRO TT 5.0+ x-prog3) have more PROGRAMMING Software.
• X431 PAD VII/ PRO5/ PAD V/ PRO TT 5.0 + X-prog3 will program keys for German brand only, such as BMW, Mercedes Benz, VW, AUDI, Porsche, to program immobilizer key for other brands GM, Nissan, Honda, Ford, PSA, Renault, Chrysler. Toyota, Kia, Hyundai etc users are allowed to activate the IMMO software package license to the device. So you don't need to buy a separate IMMO tablet.
• After activation, X431 PAD VII/ PRO5/ PAD V/ PRO TT 5.0 will have the same immobilizer function as X431 IMMO Plus or IMMO Elite. 
• For example, if need to use VAG IMMO4 key programming function and everything is up to date, but X431 (with x-prog3) says ‘Download or Update IMMO software package’ , in this case you need to activate immo software license to the device.

Launch X-431 IMMO PLUS & IMMO Elite Main Functions

• All Key lost for Audi and Volkswagen.
• [Bi-directional Control] : An essential feature for quickly locating vehicle problems and saving your time.
• Auto scan + remote diagnostics + diagnostic feedback+  Engine Module and Transmission Module Cloning
• [VAG Guided Functions] : Offer step-by-step instructions and guide technicians to do fast repairs.
• [Variant coding/Offline Programming] : IMMO PLUS key programmer supports Benz Variant Coding, VW Long Coding, Ford/Mazda PMI.
• [Anti-Theft IMMO Function] : For Mercedes-Benz, BMW, Audi, Volkswagen and Porsche Read PIN; Key Generation, Key Learning, Remote Learning, Key Matching, IMMO ECU Reset/ Adaption, IMMO Data Backup/ Restore, Unlock Used Radio, etc.
• [Advance Programming Functions] Read PIN/CS, Add/Delete key fobs, All keys lost, Reset/Code/Backup ECU, Replace Module (Compatible with Bosch/Continental/Siemens/Delco brands), Read/Delete Data, Read & Write EEPROM/MCU Chip, Read/Write EEPROM and FLASH of ENG ECU and TCM ECU, Read/Write MC9S12 Encryption Chip, Remote learning, etc.  
• [Full System Diagnostic] Launch X431 IMM0 Plus covering global 99% models, supports diagnosis functions for full systems including ENG/TCM/BCM/TPMS/SRS/ABS/...such as read/clear fault codes, read data streams/car info, active test, special functions, ECU Coding, Initialization, etc, which can be realized Car fault diagnosis for almost models and all systems.
• [Support CANFD/DOIP ] Support CAN FD protocol cars connecting directly, need Purchase extra DOIP Connector, the application of new protocols CAN FD/DoIP boosts 2x faster vehicle communication between modules, get much higher data rates & faster diagnostic speed than ever. 
• [AutoAuth for FCA SGW] Use the latest software update function AutoAuth to provide diagnosis, active testing, etc., making the diagnostics more secure.Applicable to FCA vehicles equipped with a security gateway module (SGW) in 2017 and later.
• [ECU Coding] LAUNCH X431 IMM0 PLUS newly apply ECU coding to rewrite code data to help activate/match/code/relearn the replaced ECU modules to the on-board systems. X431 IMM0 Plus scanner also can help you customize car faster as needed, optimize the specific performance of vehicles to improve fuel efficiency, unlock hidden features, deactivate annoying features. 2024 NEW ADDED FEATURE-PMI(Pr0grammable Module Installation) function For Ford /Lincoin/ Mazda etc.
• [IMMO Functions & Key Programmer] As a professional IMMO programmer, Launch IMMO Plus can help you: Read PIN/CS, Reset/Code/Backup/Clone IMMO ECU, Replace/Clone Module (Compatible with Bosch/Continental/Siemens/Delco brands), Read/Delete IMMO Data, Read & Write EEPROM/MCU Chip, Read/Write EEPROM and FLASH of ENG ECU and TCM ECU, Read/Write MC9S12 Encryption Chip, Add/Delete a Key Fob, All Keys Lost, Key generation, Key learning, Remote learning, etc. 🔯Functions above vary by cars.
• [ECU Module Clone] : Cover Engine/Gearbox ECU Clone for 5000+ models. Easily replace the new/used modules without complex & tedious operations.
• [Bi-Directional Control/Active Test]   It can perform various active tests by directly sending commands to ECUs and receiving status information, quickly make sense to pinpoint problems if a specific system/component/subsystem is functioning properly or not. Functioning well on Windows/Doors/Sunroofs/Coolant Fans/Valves/Headlamps/etc. 
• [39+ Special Resets ] LAUNCH X431 IMMO Plus Scanner equipped with 39+ maintenance services to handle the most complex vehicles, performs well in various resets/learning/matching including Oil Reset/SAS Reset/EPB Reset/ABS Bleeding/Gear learning, etc., the device's one-touch AutoVIN & AutoScan functions make diagnose hidden problems a breeze. More than 100+ hidden features in 'Diagnose>Car Model>Special Function'. Note: functions vary by car model&year.
• [Key Programmer]  Key Programmer(Package doesn't include), Identify car key chips and generate various types of chip models from super remotes, read the remote control frequency of car keys, and generate remote control devices for different car models from various types of super remotes. (PS: Need extra purchase X431 Key Pr0grammer & 4 Keys Set)
• NEW!  with integrated mqb2 calculator (get MQB sync data for free)
• NEW! Update VAG MQB NEC35XX add key and all keys lost  
• NEW! Supports VW Audi IMMO4 IMMO5 MQB/MLB gearbox module replacement 
• NEW! Adds V-A-G MQB RH850/V850 R7F7014xx 5A key programming

 

After activating IMMO software package, your PAD7 or Pro5 will have the following IMMOBILIZER software.

How to activate Launch immo function update service License?

1. Enter the mall and select Activation/Renewal of IMMO Vehicle Software.
 
2. Select Subscription Renewal Card Pay in the lower right corner.

3. Enter the 24-digit card password to activate.

4. After activation, you can enter the software updatecenter to update the anti-theft software with theanti-theft label "_IMMO".

5. After the upgrade, enter the vehicle diagnosis page, and you can see that an IMMO function module has been added, and the anti-theft software of each car system is below.

FYI: To use remote/transponder cloning/generation functions, you should have Launch X431 key programmer add-on modules.

Launch X431 IMMO Software Package Configuration/Software List

After activating IMMO software package, your PAD7 or Pro5 will have the following IMMOBILIZER software.

Package List:

1 full set x Launch X-PROG 3
2 Years IMMO Function Activation Service(Do Online,no need ship）

 

Ship from EU/UK/Other Overseas Warehouse

• Normally take about 3-5 working days to arrive
• Valid for EU/UK Local Address Only - Only Item title marked "EU/UK SHIP" will ship from EU/UK warehouse!
• EU Warehouse was located in Germany/Czech and it only can ship to EU country: 
  Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
  Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
  Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia 
• Note: If EU/UK Stock sold out, your order will be shipped from China via DHL or YANWEN (No Tax) by default.

• Whatsapp: +8615980495251
• Email: sales@X431shop.eu
• Hot line: +8615980495251

Click to join the X431shop.eu Tech Support WhatsApp Group