LAUNCH BST360 Car Bluetooth Battery Tester is a 6V/12V lead-acid battery test clip that supports Bluetooth wireless communication, can be used with X431 V+, X431 PRO5, X431 PAD V/ PAD VII CR919E CRP919X CRP909, It is used for measuring the actual Cold Cranking Ampere(CCA) of the car starter battery, analyzing the battery health, and detecting the starting system and the charging system of the car.
Launch BST-360 Bluetooth Battery Tester
LAUNCH BST360 Car Bluetooth Battery Tester is a new generation of 6V/12V lead-acid battery test clip that supports Bluetooth wireless communication. It is used for measuring the actual Cold Cranking Ampere(CCA) of the car starter battery, analyzing the battery health, and detecting the starting system and the charging system of the car.
BST-360 Highlight
Cable length: about 56cm
Small Size, Easy to Carry & Use, Plug and Play
Test voltage range: 6V~16V Test capacity range: 30AH-80AH
Support battery types: such as Regular Flooded, AMG Plate, GEL, EFP, Enhanced Water-filled Lead Acid
Compatible with cars, motorcycles, trucks, RVs, ATVs, SUVs, boats, yachts, mowers, and even golf carts.
Fast & Accurate & Safe: Launch BST360 is Plug-and-Play, and it provides Accuracy testing reports within seconds
With polarity reversal protection, clip reversal will not damage the tester, nor will it have any adverse effect on the car and battery.
Compatible with LAUNCH X-431 Scanners include X431 V+, X-431 PAD V, X-431 PAD VII, X-431 PRO GT, X-431 PRO V4.0, X-431 PRO3 V4.0, X-431 PRO5, X-431 PAD III V2.0
Compatible with all 6 volt and 12 volt lead-acid batteries include regular flooded, AGM flat plate, AGM spiral, GEL, and EFB batteries with the test range (100-2000 CCA).
Main Fucntions
BST360 can directly test the loss of power battery, no need to be fully charged first and tested.
Can check the overall health of the battery, including the cranking test, and run a complete system charging test.
BST360 using the newest Bluetooth technology to detecth te car battery, after connecting the car battery you can open the app on your phone/tablet
The test report can be sent as a PDF file (on LAUNCH X431 Tablet) or Picture (on your phone/other tablets) by Bluetooth to everywhere you want and print.
Support for multiple languages : Chinese, English, German, French, Russian, Italian, Japanese, Spanish, Portuguese, etc. The language display depends on the language setting of your phone/tablet.'
How to use BST360 Car Battery Tester :
1). First clamp the BLACK and clips of the battery tester on the Negative (-) and Positive (+) terminals of the vehicle battery respectively.
2). Open BST360 App.
3). In the pop-up Bluetooth list, select the Bluetooth name (starting with BST360xxx) of the battery tester to be paired.
4). After pairing, it can be used normally.
NOTE:
Launch-specific: The LAUNCH X431 Scanner needs to be equipped with the BST360 module.
Phone: Go to Google play (for Android) or App Store (for iOS) and input “BST360" in the search bar to download and install it.
Launch BST360 Bluetooth Battery Tester Supports All 6v and 12V Lead-acid Battery Testing
Standard --- Description --- (Testing Range )
CCA --- Cold Cranking Amps, as specified by SAE. The most common rating for cranking batteries at 0°F (-18°C).--- (100-1100 )
CA --- Cranking Amps standard. The effective starting current value at 0°C (32°F). --- ( 100-1100 )
MCA --- Marine Cranking Amps standard. The effective starting current value at 0°C (32°F). --- (100-1100 )
JIS --- Japanese Industry Standard, shown on a battery as a combination of numbers and letters.--- ( 26A17--245H52 )
DIN --- Deutsche Industrie-Norm. --- ( 100-1100 )
IEC --- International Electro technical Commission. --- ( 100-1100 )
EN --- Europa-Norm --- ( 100-1100 )
SAE --- Society of Automotive Engineers --- ( 100-1100 )
BCI---American Battery Council International ( Publishes Automotive Battery Standards)
Where To Download BST-360 App?
BST360 is able to sync with smart phones (both Android and IOS) and Launch Diagnostic Scan Tools.
Need to download App from Google or Android play store if use on mobile phone.
1. Install BST360 Application from Google Play Store
2. Allow all the access then the app is ready to use
BST-360 can be used as add-on of X431 V or PAD series, in this case, users don't need to download app.
Launch BST-860 vs BST-560 vs BST-360
Item Name
BST-860
BST-560
BST-360
Display
4-Line LCD with Backlight
4-Line LCD with Backlight
N/A
Battery Standard
CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB
BatteryType
Lead-acid,GEL, AGM
Lead-acid,GEL, AGM
Lead-acid,GEL, AGM
6V/12V
Yes
Yes
Yes
24V
Yes
N/A
N/A
Print
Built-in thermal printer
N/A
Yes, via smartphone or scan tools
Work Mode
Standalone
Standalone
Work with X431 scanners or Smartphone
Specification:
Model: BST360
Connection Method: Bluetooth
Test Voltage Range: 11-16V
Measuring capacity range: 30Ah-80AH
Working Temperature: -10-50℃
Storage Temperature:-20-60℃
Package List:
1pc x Launch BST-360
Ship from EU/UK/Other Overseas Warehouse
Normally take about 3-5 working days to arrive
Valid for EU/UK Local Address Only - Only Item title marked "EU/UK SHIP" will ship from EU/UK warehouse!
EU Warehouse was located in Germany/Czech and it only can ship to EU country: Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia, Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg, Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia
Note: If EU/UK Stock sold out, your order will be shipped from China via DHL or YANWEN (No Tax) by default.
1. Connect the BST-360 to the vehicle's OBD-II port and turn on the ignition.
2. Navigate through the BST-360 menu to select the "Battery/Starting/Charging" test.
3. Follow the on-screen prompts to perform the test. The BST360 will analyze the battery, starter, and alternator performance and provide a detailed report of the results.
4. Once the test is complete, select the option to "Save" the results.
5. Navigate back to the main menu of the BST-360 and select the "Diagnostic Report" option.
6. Select the "Add Test Results" option and choose "Battery/Starting/Charging" from the list of available tests.
7. The test results will be added to the full diagnostic report, along with any other test results that have been saved.
8. Save the full diagnostic report and print it out or email it to the customer.
By following these steps, you can add the results of the battery, starting, and charging system test to a full diagnostic report using the BST-360. This will help you provide a comprehensive report to the customer and assist in identifying any potential issues with the vehicle's electrical system.