Ship From EU/UK 2 Years Free Update Launch X431 PROS V5.0 Car Scanner With Launch X431 GIII X-PROG 3 Immobilizer Key Programmer

Product Description

• NEW OPTIONAL FUNCTIONS: (Need Buy-Extra)
  1) VSP600 Videoscope: Check unseen parts and give you a direct image of the engine, gears, compressors, headers and valves, and body components.
  2) X431 TSGUN: Active and relearn TPMS sensors; and program LAUNCH TPMS sensor.
  3) X-431 ADAS Mobile/PRO: Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system.
  4) X-PROG3: Add, delete, and reprogram keys; rewrite smart keys; replace key ECU.
  5) X431 WiFi Printer: Print diagnostic data or report for further analyzing and reviewing.
  6) Launch BST-360: Check the SOH of the on-board battery, functionality of discharge capacity and start-up capacity, etc. Provide a reliable analysis basis for the inspection and maintenance of car batteries.

V10.95 Launch X431 GIII X-PROG 3 Immobilizer Key Programmer

X-431 GIII X-PROG 3 Highlight

• LAUNCH Official authorized dealer, 100% original
• Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
• Supported models: 60+ brands in America, Europe and Asia.  More models and systems continue to be updated.
• Supported brands: VW, AUDI,Porsche,SKODA, SEAT, BMW, MERCEDES BENZ, TOYOTA, Opel, Renault, PSA, Fiat and more continue to be updated
• For advanced key programming, you can check optional extended IMMO software, all vehicle manufacturers will be available (over 100 other brands).
• X-431 GIII X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read and write keys to the vehicle.
• Compatible with Multiple X-431 Series Diagnostic Tablet (PRO Elite, X-431 V, X-431 V+,X431 PRO3, X431 Pro5, X431 ProS, X431 Pro3s+,X431 PAD III, X-431 PAD V, X-431 PAD VII, Immo PAD, Immo Pro, Immo Plus，Immo Elite, X-DIAG Pro3 etc)

X431 X-PROG G3  Main Functions:

• Supports MQB.
• All-in-One Key Programmer. Integrates Multiple Function Models.
• Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
• Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
• Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
• Update VAG MQB NEC35XX D70F3524, D70F3525, D70F3526, D70F3529, D70F3532, D70F3537 add key & all keys lost NEW!!!
• X-PROG 3 enables reading and writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.
• X-PROG 3 enables anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement.
• More than just key programming — The LAUNCH XPROG 3 also supports advanced coding/programming functions: - ECU replacemetn for 4TH Generation Audi (0AW/0B5) gearboxs. - Reading, writing & cloning of the ECU for 4TH Generation VW UDS engines. - BMW E chassis 8HP gearbox ECU program wiping,.etc.

XPROG3 Advantage Functions

• 1. Read BMW engine ISN code.
• 2. Read/write BMW CAS4+ and FEM chips.
• 3. Read/write Audi fifth-generation steering column chips
• 4. Read/write EEPROM.
• 5. Read/write MCU.
• 6. VW Fourth-generation Dump Mode All Keys Lost.
• 7. Read engine in BENCH mode.
• 8. Read gearbox data.
• 9. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
• 10. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
• 11. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
• 12. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
• 13. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
• 14. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU) etc.

Extended function 

• Use with  X-431 SmartLink C HD LITE Package 
• Use With X-431 Wi-Fi Printer:  Print out diagnostic data & reports.
• Use With S2-2 SensorBox:  test and simulate most vehicle sensors. quickly troubleshooting the ECU
• Use With O2-2 ScopeBox:  analyzes data for all kinds of the testing applications on the automotive parts to resolve complex electrical faults.
• Use With X-PROG & X-PROG3 Immobilizer: for key programming & IMMO service.  Clone Mercedes Benz ECU 2015 upwards
• Use With VSP-600 VideoScope: helps technicians to check issues on unreachable area in a vehicle So they can view, record and save images and videos.
• Use With Launch motorcycle connector kit: Support to diagnose Harley Ducati Indian Polaris Victory Honda Yamaha Kawasaki Suzuki BMW Motorcycles.
• Use With Launch X431 X-PROG 3+ IMMO Function Service  Launch X431 PROS V5.0 will have the same immobilizer function as X431 IMMO Plus or IMMO Elite. 
• Use With LAUNCH Non-16 Pin Adaptor Box: Support  specific vehicles produced between 1996 and 2002 without the standard OBD2 pin configuration.
• Use With X-431 TSGUN:  Support to activate TPMS sensors, Read sensor data, TPMS diagnose, Read/clear TPMS DTCs; Scan TPMS sensor ID, program tpms sensor.
• Use With BTS360 Bluetooth Battery Tester:  Measuring the actual Cold Cranking Ampere(CCA) of the car starter battery, analyzing the battery health, and detecting the starting system and the charging system of the car.
• Use With Launch X431 Key Remote Maker Able to read Transponder, Generate Launch super chip and universal remote keys, Transponder, Detect Frequency, Detect Ignition switch coil signal, Generate Launch super chip and universal remote key
• Use With ADAS software Calibration: Advanced driver assistance systems, or ADAS is designed to improve driver, passenger and pedestrian safety by reducing both the severity and overall number of motor vehicle accidents. ADAS can warn drivers of potential dangers, intervene to help the driver remain in control in order to prevent an accident and, if necessary, reduce the severity of an accident if it can’t be avoided.
• Use With Smartlink C supports remote diagnosis (needs activation card) 3-in-1 SmartLink C Device: Work as VCI to obtain vehicle data; Provide dual diagnostic modes; Act as a J2534 programming device.
• Use With Launch X431 EV Diagnostic Upgrade Kit : Supports New Energy Battery Diagnostics.  Includes activation card and adapters for specific electric vehicles to perform battery pack analysis. Can diagnose battery pack State of Charge and State of Health on Tesla, BYD and many other electric vehicles.
• Used With Launch X431 DoIP 16Pin Cable Which Compatible With DBScar VII Scanner Such as CRP919X BT/ CRP919E BT/ Pro3 APEX/ ProS V5.0/X431 PRO3 ACE, With this cable, your device DBScar VII could work with Doip protocols cars such as BMW, Mercedes Benz, Land Rover, Lingke, and Volvo, it will be faster and more stable

Launch X431 G-3 Core Functions

• Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
• Supports the BMW CAS4/ CAS4+ module replacement.
• Supports the ECU cloning and replacement for BMW Siemens engines.
• Supports ECU replacement for the fourth-generation of VW/AUDI engine;
• Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
• Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
• Erase the password for Mercedes-Benz engine and gearbox within 3S.11.
• Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
• Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
• Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
• Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).

Launch X-prog3 compatible keys:
1. Original Keys (OEM keys)
2. Launch dedicated universal remote keys
3. Xhorse Autel Keydiy universal keys (generated by corresponding remote makers.)







Supported Chip Brands:
It supports common mainstream ECU MCU manufacturers, with more than 1,000 product models, and they are continuously being updated.

Atmel	NSC
Fujitsu	Philips
Infineon	Renesas M16
MC68HC05	Renesas M32
MC68HC08	Renesas M32R
MC68HC11	Renesas M32C
MC68HC12	Renesas R8C
MediaTek	Renesas V850 SPI
MicroChip	Renesas V850 UART
Nordic	Samsung
ST	SiLabs

Supported EEPROM Brands:
It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and they are continuously being updated.
 

4Wire	GI	Numonys	SST
Adesto	GigaDevice	OKI	ST
AKM	Grundig	ON Semi	Toshiba
Altera	HOLTEK	Other	Winbond
Amic	Hynix	PCT	Xicor
Atmel	I2C	Philips	xUSSR
BOSCH	ITT	Pioneer	YMC
Catalyst	KHIC	PMC	Spansion
Chings	Macronix	Ramtron	SPI
Dallas/Maxim	MicroChip	Rohm	NEC
EON	Micron	Samsung	NSC
ESMT	MicroWire	Seiko	Ford
EXEL	Mitsubishi	Siemens	Fujitsu
Fairchild	Motorola	Sony

 

• Normally take about 3-5 working days to arrive
• Valid for EU/UK Local Address Only - Only Item title marked "EU/UK SHIP" will ship from EU/UK warehouse!
• EU Warehouse was located in Germany/Czech and it only can ship to EU country: 
  Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
  Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
  Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia 
• Note: If EU/UK Stock sold out, your order will be shipped from China via DHL or YANWEN (No Tax) by default.

For any question, please contact us at:

• Whatsapp: +8615980495251
• Email: sales@X431shop.eu
• Hot line: +8615980495251

Click to join the X431shop.eu Tech Support WhatsApp Group