The biggest difference is IMMO Plus supports ECU Coding while IMMO Elite can’t.
IMMO Plus supports ECU coding, active test and guided function. IMMO Elite does not.
IMMO Plus supports TSGUN TPMS add-on, IMMO Elite does not.
IMMO Plus supports advanced system diagnostic while IMMO Elite supports basic system diagnostic, this will allow IMMO Plus supports more brands vehicles to do full system diagnostic, active test, module initialization and free resets.
For X-431 IMMO ELITE, it covers basic diagnostic functions, including read version information, read DTCs (Diagnostic Trouble Codes), clear DTCs and read data stream.
For X-431 IMMO PLUS, it covers full diagnostic function, including read version information, read DTCs (Diagnostic Trouble Codes), clear DTCs, read data stream, actuation test, matching, coding and programming etc
If you need to update the Launch X431 IMMO Plus to Launch X431 IMMO Plus, pls buy this update service>>>
How Powerful Combine with X-PROG3 and Launch X431 IMMO ELITE?
Automatically identify the type of anti-theft system, intelligently combining the matching process. Easy to use. You only need to operate according to the device prompts to perform relevant operations. A novice user can also perform Key Learning.
Meet the needs of professional technicians. It is more powerful for its advanced key learning functions, including: Engine/Gearbox ECU Module Cloning & Replacement; Read PIN/ CS, Read PIN/ CS (All-keys-lost), IMMO ECU Reset/ Adaption, IMMO ECU Refresh/ Coding, Remote Learning, Backup/ restore EEPROM data, Backup/ restore IMMO data, BMW FEM/ BDC Key Learning and Adaption And more...(Note: Programming Functions are not all available and vary by vehicle!!!)
X-PROG3 Details&Functions:
1. Car key slot-Place the car key to perform the key matching function
2.DB26-Connect to various anti-theft wiring harnesses, such as the data collection line for the fourth generation of instrument keys, etc.
3. Mercedes-Benz key infrared slot-Place the Mercedes-Benz infrared key to perform the key matching function
4. Car key chip hole-Place the key chip to perform key matching
5. Status indicator-Power indicator
6.DIY slot-Connect the anti-theft ECU pin through the cable to read and write data
7. Locker Install chip burning socket-Complete EEPROM or MCU data read and write operations
8.DC12V power supply-Connect DC12 power supply
9.DB15-Connect the main wiring
Powerful Functions List：EEPROM read and write, Key read and write, special key generation, on-board MCU read and write, BMW engine ISN code reading, Benz key, BMW CAS4+, FEM chip read and write, Key Simulator, Audi 5th generation steering column chip reading and writing, Volkswagen's fourth-generation meters are lost, OBD reads MED17 engine, Read engine in BENCH mode, Volkswagen fourth-generation UDS engine replacement, Boot mode read engine, Volkswagen MQB engine, gearbox, steering column lock replacement, Volkswagen four-generation accounts are all lost, Mercedes-Benz engine gearbox wipe empty function, Transmission data reading etc.
LAUNCH X431 PROG-3 can be connected to other Launch x431 series car scanners including X-431 PRO ELITE, X-431 PRO MINI V3.0, X-431 PROS MINI V3.0, X-431 PROS V1.0, X-431 V V4.0, X-431 V+ V4.0, X-431 PRO 3S+ V2.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII, to meet your need in the most degree.
Core Functions:
1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of VW/AUDI engine;
5. Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
Launch X431 IMMO ELITE Functions:
Full Bi-directional Control Function+Wide Coverage of Cars
Bi-directional Control: Put out the commands to ECUs,read the ecu data and monitor the operation of actuators.
By turning the fuel pump on and off via the x431 immo elite, you can quickly determine whether it's a wiring, relay, or pump issue without removing any parts. (Note: Functions are not all available and vary by vehicle!!!)
IMMO ELITE's IMMO Anti-theft functions vehicle coverage list: Car models and functions supported by X-431 IMMO function (2022-11-18)
Launch X431 IMMO ELITE Support 95% Car Models Diagnostic Function and Immo Function such as:
Audi, BMW, Mercedes Benz, Sprinter, Peugeot Citroen, Toyota, Volvo, Porsche, Land Rover, Mitsubishi, Subaru, Honda, Nissan, Isuzu, Hyundai, Kia, BYD, Chrysler, GM, Ford, Maserati, Mazda, Jaguar, Renault, Fiat, Ferrari, Roewemg, Opel, Suzuki, Baichs, GWM, LIEBAO, CHANGHE, CHDAIHATSU, COWIN, DFPV and more.
Such tests may also include relay or switch, between two operating states. Available tests vary by vehicle. Such as:
Turn on the radiator fan; Modulate the throttle; Open/ close windows; Operate mirrors; Injector Buz Test; Turn on interior & exterior lights; Sound horn; Test door lock actuators; Injector Test; Turn Off ACC Lane Keeping Assist System (LKAS); Turn ON/ OFF Front and Rear side ACM Solenoid; Turning the fuel pump on and off; Cycling the a/c; Clutch on and off; Left clutch electromagnetic coil test; Acceleration Device Test; Oil Pressure Control Test; DYNAMIC camera aiming; Vehicle level position calibration; Brake Vacuum Pump; Inlet and Outlet Valve tests; Open Brakes tests; Parking Brake Botors; Wheel Speed Sensor Supply; PARKING BRAKE tests and more. (Note: Functions are not all available and vary by vehicle!!!)
OE- Level Full System Diagnosis
As an OE level automotive diagnostic tool, LAUNCH X431 IMMO Elite can access most car ECUs to read, clear codes, retrieve live data, freeze frame, ECU information, matching, adaptation, turn off warning lights, reset monitors. Full range car models and full car system diagnose make it a professional automotive diagnostic tool.
Include : ABS System, Engine System, SAS System , TPMS System , IMMO System , Battery System ,Oil Service System , SRS System ,DPF System ，Air Conditioning System，Transmission System, etc...
Brief introduction of its capabilities in full systems diagnostic as follows:
1. For Engine System:help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.
2. For Transmission: It makes great sense in the safety driving when your car is slipping or difficult to shift, this diagnostic tool can figure the problems out via reading codes in the Transmission system, or check the health status via live data viewing.
3. For ABS System: Diagnosing an ABS problem should always start with a visual inspection of all brake components, next you will need to retrieve ABS codes to tell you where the problem is, and this is what this diagnostic does for you.
4. For SRS System: SRS, safety restraint system, is made up of impact sensors, a control module, and the airbags themselves, and this diagnostic tool can detect every electronic parameter to check its health status.
5. To diagnose Brake System: if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;
6. To diagnose Emission System: if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;
7. To diagnose Fuel system: if vehicle won't start or “Check Engine” light is illuminated. Check car's fuel system regularly ensures the best performance of your car with the lowest emissions;
8. To diagnose Transmission: if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;
9. To diagnose Wiper System: if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can't see clearly;
10. To diagnose Light System: if you see rapid signal blinking or dimming lights. And many more ....
Immo & Key Proframming/Matching
IMMO password reading
Support the IMMO password reading function for models such as for BMW, for Mercedes-Benz, for Volkswagen, for Audi, for Peugeot, for Citroen, for GM, for Nissan, for Hyundai, for Kia, for Chery, for Dongfeng Fengxing, and for JAC passenger cars.
IMMO Programming
Support car key chip reading/ writing, EEPROM chip reading/ writing, MCU chip reading/ writing, EEPROM and FLASH reading/ writing of engine ECU and gearbox ECU.
IMMO Matching
Support 60+ brands of independent IMMO matching software for American, European, and Asian models. Support further in-depth development and coverage of IMMO software for various models. Support more password reading, key adding, all keys losing and IMMO related module replacement functions. Menus are optimized, the operation process is more convenient, and more brands continue to be launched.
IMMO module replacement
Support the IMMO module replacement functionfor models such as for BMW, for Mercedes-Benz, for Volkswagen, for Audi, for Porsche, for Honda, for Nissan, for Hyundai, for Kia, for BYD, for Changan Automobile, for Wuling Baojun, for GAC Trumpchi, for SAIC Maxus, for Great Wall Motor , for Chery, for Dongfeng, for Fengxing, and for JAC passenger cars.
Full OBD2 10 Modes
Support the full-model system-wide diagnosis of basic functions all 10 modes of OBDII standard to ensure complete, accurate, system diagnosis. Read and Clear DTCs, do smog tests , I/M readiness and O2 sensor tests, Mode 06 EVAP system test, Mode 08 on-board test component test for global 110+ brands. And OBDII Code lookup tool and acronym database to assist and speed diagnosis and repair time.
Anti-theft advantages
X431 IMMO ELITE is an anti-theft matching tool, support the ECM and TCM module's clone and support module main supplier BOSCH, Continental and/or Siemens, DELCO, ZF, GETRAG and Temic etc. The advantages of anti-theft module replacement and anti-theft module cloning are listed as follows:
1. The total anti-theft data has supported ecu module cloning of 5000+ car models, and the data is far more than that of anti-theft products of the same type.
2. Support the anti-theft function of GM vehicles as follows: 1.Support anti-theft data synchronization after the replacement of the Ford anti-theft module; 2.Although the anti-theft module of general Motors such as Chrysler cannot do anti-theft data synchronization, it can be processed by cloning.
3. Support the anti-theft function of Volkswagen and Audi as follows: 1.Volkswagen Audi 4 and 5 generation key matching;2.Volkswagen 4 generation instrument open and read all lost (part); 3.Volkswagen 4 generation free account all lost (part); 4.Audi 5 generation steering column chip read and write,OBD read 4th generation MED17/EDC17; 5.Volkswagen Audi MQB engine, gear box, Steering column replacement; 6.Volkswagen Audi 5 generation and MQB transmission FLASH and EEPROM reading and writing; 7.Volkswagen Audi BOSCH engine cloning; 8.Volkswagen Audi Siemens engine cloning; 8.Volkswagen online fourth-generation instrument key addition and key loss function; 9.Volkswagen online fourth-generation instrument MQB key addition and key loss function; 10.Volkswagen fourth-generation instrument (5ND920873B) key loss and instrument replacement; 11.UDS engine replacement function after 14 years; 12.fourth-generation instrument + fifth-generation Bosch engine (no need for the original car engine). The obvious advantage is that the X-431 IMMO ELITE supports the fourth and fifth generation of Volkswagen Audi anti-theft. The fourth-generation keys and MQB keys of the VW fourth-generation instrument type can be added online and lost completely. The matching process instrument has no black screen and the anti-theft data of the instrument has no change. OBD direct connection mode is adopted.
4. Support Mercedes-Benz anti-theft functions as follows: 1.Mercedes-Benz key matching (FBS3); 2.Mercedes-benz engine, gear box wipe empty (FBS3); 3.Mercedes-Benz hanging gear computer wipe empty (FBS3 and before); 4.Benz Engine Clone (FBS4); Benz Gear Box Clone (FBS4); 5.Benz key added calculated password (FBS3); 6.Mercedes key lost calculation password (FBS3); 7.Mercedes-benz lock replacement (FBS3). Note: The maintenance technician can program, code and initialize the Mercedes-Benz anti-theft control module after the anti-theft data is written in the previous 13 models; After 14, they need to be online. The replacement of Benz engine and transmission control module before 2021 model can be handled by cloning function of X-431 IMMO ELITE module.
5. Support BMW anti-theft functions as follows: 1.BMW (CAS1, CAS2, CAS3, CAS4, FEM/BDC); 2.BMW engine ISN code reading; 3.BMW E chassis 8HP gear box wipe empty; 4.BMW E chassis 8HP gear box clone, BMW F chassis 6HP gear box wipe empty/clone; 5.BMW F/G chassis 8HP gear box clone; 6.BMW F/G chassis 8HP gear box clone gear box wipe empty; 7.BMW engine replacement; 8.BMW BOSCH engine clone; 9.BMW Siemens engine clone.
6. Support Porsche anti-theft functions as follows: 1.Porsche 2011-2017 key matching; 2.Porsche front end and back end computer cloning; 3.Porsche Siemens engine computer cloning; 4.Porsche battery data repair.
7. There are more advantages of Asian car series, other car series and so on.
IMMO Status Scan: Perform a comprehensive scanning over all the systems (Engine, IMMO, Remote Control) to locate fault systems and retrieve DTCs.
Vehicle IMMO Information: Display the specific information for the tested IMMO ECU, including vehicle VIN number, PIN code and other IMMO information.
Independent Anti-theft menu, more convenient operation: With the unique anti-theft matching and anti-theft programming modules, in-depth development and optimization have been carried out for the anti-theft software of American, European and Asian car models.
Anti-theft function, support a wide range of models: Support anti-theft type identification, anti-theft password reading, remote control matching, key matching, key chip reading and writing, anti-theft parts replacement and other functions, support up to 90+ brands, and the coverage of models continues to increase.
What Other Functions Included?
Intelligent Diagnosis:Through "intelligent diagnosis", you can quickly read the VIN, quickly enter the diagnosis, and check the historical diagnosis records.Traditional Diagnosis: Support system-wide diagnosis and basic function diagnosis (read version information, read DTCs, clear DTCs, read data streams) for 110+ brand models to help quickly diagnose vehicle faults.
Open Source Android 10.0: That means you can download any APP, Tiktok,Facebook, instagram. At the same time, it has the functions of taking photos, video and multimedia.
AUTO VIN Scan for Quick Diagnosis: Launch X431 IMMO ELITE features the latest VIN-based Auto VIN Scan technology to identify vehicles and it is applied to IMMO, Programming, Diagnostics and Services. Just need one click, you can scan your car’s detailed version information, also all diagnostic trouble codes and live data stream, freeze frame of full electrical control units.
Mall Service: Launch X431 IMMO ELITE can support some motor software,but you need to extra purchase. You can find BMW motor software,Demo motor software,Suzuki motor software,Honda motor software,Yamaha motor software and more motor software in the "MALL" SERVICE. (Note: You need to buy diagnostic mainline to use the immo function of the corresponding motorcycle model.)
Step-by-Step IMMO Keys: It provides guided functions with step-by-step instructions for Key Learning, Remote Control Learning, and Remote Control Add, etc.
99% OBD Coverage: Industry-leading IMMO Keys programming by OBD, covering 99% cars on road, including BMW, Volkswagen, Toyota, Honda, and General Motors and more.
CAN FD Protocol & DoIP Protocol Supported: x431 IMMO Elite is compatible with CAN FD & DOIP (DoIP needs extra adapter) protocols for more newer cars even 2023-2024 that optimize data communication rate between cars and car scanner and extend diagnostic coverage on more vehicle models such as GM, Land Rover, Jaguar, Volvo, etc.
FCA "Auto Auth" Access: AutoAuth for FCA SGW which makes X431 works with Chrysler,Dodge,Jeep,Alfa Romeo and Fiat after 2017.
Easy Report Share & Save & Printing : You can easily share and save diagnostic reports to your computer via Bluetooth or WiFi without worrying about running out of memory. Enables diagnostic tech or mechanics to generate diagnostic reports before and after car diagnostics and maintenance services for comparison or sharing with customers by printing it out or sending it to customers via PDF.
Diagnostic Records: During every diagnostic process, a vehicle diagnostic record is automatically generated, which is easy to view and compare at any time and help locate faults.
Testable Models: You can query the supported brands, models, systems, and functions online at any time.
Diagnostic Feedback: When users encounter abnormal models and functions under special circumstances during use, they can provide opinions to Launch through diagnostic feedback, and special technical personnel will track and deal with the problems in time.
Remote Diagnosis: Remote diagnosis can realize real-time communication between equipment and equipment or between equipment and computer, complete vehicle remote diagnosis, and make it a reality for repair technicians to diagnose vehicles thousands of miles away.
39+ Reset Service Supports
1> Oil Reset Service
This function enables you to reset the oil service for the engine oil life system,which calculates an optimal oil life change interval depending on the vehicle driving conditions and weather events.
lt needs to be performed in the following cases:
1. lf the service lamp is on, run car diagnostics first for troubleshooting. After that, reset the driving mileage or driving time, so as to turn off the service lamp and enable a new driving cycle.
2. lf the service lamp is not on, but you have changed the engine oil or electric
appliances that monitor oil life, you need to reset the service lamp.
2> Electronic Parking Brake Reset
This function enables you to reset the brake pad after replacing the brake pad.lt needs to be performed in the following cases:
1.The brake pad and brake pad wear sensor are replaced.
2.The brake pad indicator lamp is on.
3.The brake pad sensor circuit is short, which is recovered.4.The servo motor is replaced.
3> Steering Angle Calibration
This function enables you to reset the steering angle,after replacing the steering angle position sensor,replacing steering mechanical parts (such as steering gearbox,steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering car body.
To reset the steering angle, first find the relative zero point position for the car to drive in straight line. Taking this position as reference,the ECU can calculate the accurate angle for left and right steering.
4> ABS Bleeding
This function allows you to perform various bi-directional tests to check the operating conditions of Anti-lock Braking System(ABS).
lt needs to be performed in the following cases:
1. When the ABS contains air.
2. When the ABS computer, ABS pump, brake master cylinder, brake cylinder,brake line, or brake fluid is replaced.
5> Gear Learning
This function enables you to perform tooth learning for the car, to turn off the MIL.
lt needs to be performed in the following cases:
1. After the engine ECU, crankshaft position sensor, or crankshaft flywheel isreplaced.
2. The DTC 'tooth not learned' is present.
6> IMMO Service
This function enables you to perform the IMMO key matching function, sothat the immobilizer control system on the car identifies and authorizes remotecontrol keys to normally use the car.
lt needs to be performed in the following cases:
When the ignition switch key, ignition switch,combined instrument panel,ECU,BCM, or remote control battery is replaced.
7> Injector Coding
This function enables you to write injector actual code or rewrite code inthe ECU to the injector code of the corresponding cylinder，so as to moreaccurately control or correct cylinder injection quantity.
lt needs to be performed in the following cases:
After the ECu or injector is replaced.
8> Battery Maintenance System Reset
This function enables you to perform a resetting operation on the monitoringunit of vehicle battery, in which the original low battery fault information will becleared and battery matching will be done.
lt needs to be performed in the following cases:1. The main battery is replaced.
2. The battery monitoring sensor is replaced.
9> Diesel Particulate Filter (DPF) Regeneration
This function enables you to clear PM(Particulate Matter) from the DPF filterthrough continuous combustion oxidation mode (such as high temperatureheating combustion,fuel additive or catalyst reduce PM ignition combustion)to stabilize the filter performance.
lt needs to be performed in the following cases:
1. The exhaust back pressure sensor is replaced.
2. The PM trap is removed or replaced.
3. The fuel additive nozzle is removed or replaced.
4. The catalytic oxidizer is removed or replaced.
5. The DPF regeneration MlL is on and maintenance is performed.
6. The DPF regeneration control module is replaced.
10> Electronic Throttle Position Reset
This function enables you to make initial settings to throttle actuators andreturns the learned values stored on ECU to the default state. Doing so canaccurately control the actions of regulating throttle (or idle engine) to adjust theamount of air intake.
11> Gearbox Matching
This function enables you to complete the gearbox self-learming to improvegear shifting quality.
lt needs to be performed in the following cases:When the gearbox is disassembled or repaired.
12> AFS (Adaptive Front-lighting System) Reset
This function enables you to initialize the adaptive headlamp system.
13> Sunroof Initialization
This function enables you to set the sunroof lock off,closed when it rains,sliding / tilting sunroof memory function, temperature threshold outside the caretc.
14> Suspension Calibration
This function enables you to adjust the height of the body.
lt needs to be performed in the following cases:
1. When replacing the body height sensor， or control module in the airsuspension system.
2. When the vehicle height is incorrect.
15> EGR Adaption
This function is used to learn the EGR(Exhaust Gas Recirculation) valve afterit is cleaned or replaced.
16> Seats Calibration
This function is applied to match the seats with memory function that arereplaced and repaired.
17> Tyre Reset
This function is used to set the size parameters of the modified or replacedtire.
18> Coolant Bleed
Use this function to activate the electronic water pump before venting thecooling system.
19> AdBlue Reset (Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, ureareset operation is required.
20> NOx Sensor Reset
NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) inengine exhaust. lf the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.
21> Ac System Initialization
AC system relearn/ initialization must be performed when the vehicle AC ECU or actuator is replaced or the ECU memory is lost.
22> High Voltage Battery Detection
This function is used for high voltage battery diagnosis and status information detection.
23> Windows Calibration
This function is used to perform door window matching to recover the ECU initial memory, and recover the automatic ascending and descending function of power window.
24> Language Change
This function is used to change system language of vehicle center console.
25> AF Reset
This function is applied to set or learn air fuel rate parameters.
26> Transport Mode
To lower vehicle power consumption, user may perform the following operations: limit vehicle speed, not wake up the network for door open and disable remote key etc. In this case, deactivating transport mode is needed to recover vehicle being normal.
27> Stop Start Reset
This function is used to open or close the automatic Start Stop function via setting the hidden function in ECU (The precondition is vehicle equipped with hidden function and hardware support).
28> Intelligent Cruise Control System Reset
This function is used to matching the intelligent cruise control module after it is replaced or repaired.
29> Engine Power Balance Monitoring
This function is used to monitor crankshaft acceleration in the power stroke of each cylinder, to determine the relative power provided by each cylinder.
30> Gas Particulate Filter (GPF) Regeneration
This function is used to perform the GPF replacement or regeneration after the fuel consumption is increased and engine output power is reduced resulting from a long time service of the GPF.
31> Motor Angle Calibration
This function is used to perform the motor angle calibration when the rotorposition detected by the motor angle position sensor is different from the actual rotor field position.
32> Automatic air conditioning initialization software Reset Service ( RESET ACINI )
33> Electronic water pump starts Reset ( RESET COOLANT )
34. RESET ECU
35. RESET FRM
36. RESET CLUTCH
37. RESET GATE
38. RESET TURBO
39. RESET RLSENSOR
How to Connect IMMO ELITE with X-PROG 3
1. DBSCar VII connect the Cable well first.
2. DBSCar VII connect the Tablet PC with USB Cable well.
3. DBSCar VII Connect X-prog 3 with the extend cable ( the cable with the port to connect the power ) well first
4.If has MCU-V3 board, pls plug to PROG3
5.Connect Power cable，pls be mind the power cable need connect X-PROG 3 well ( use the cable in Step 3, if you connect MCU-V3 board , just connect MCU-V3 board directly ) , then connect the Bench model Cable connect to X-prog 3 or MCU-V3
6.Use the exchange cable to connect Bench Model cable with the IMMO Model of the car.
LAUNCH X431 IMMO Elite Car List :
For IMMO Function :
Europen Cars :
For Audi, For Benz, For BMW, For Citroen, For GM, For Land Rover, For Mazda, For Opel, For Peugeot, For Porsche, For Renault, For MG (SAIC), For Seat, For Skoda, For Sprinter, For Suzuki, For Ford, For Volvo, For VW
China Cars :
For GWM, For Changhe, For Brilliance, For Chery, For FAW Tianjin, For ZX Auto
America Cars :
For Aston Martin, For Fiat (Brazil), For Chrysler, For Ferrari, For Fiat, For Maserati
Asia Cars :
For BAIC, For Changan, For BYD, For Foton, For Haima, For Honda, For Hyundai, For Kia, For Maxus, For Mitsubishi, For Nissan, For Perodua, For Proton, For Subaru, For Toyota, For Zotye
For Diagnostic Function :
European Cars :
For Martin Aston, For BENZ/ MAYBACH, For BMW/ MINI/ HCBMW/ ROLLSROYCE, For CITROEN/ FUKANG, For Ferrari, For Fiat/ Abbas/ Lancia/ Romeo/ NanjingFiat, For GAz, For IZH, For Land Rover/ Jaguar, For Martha Lahti, For OPEL/ GMSA/ VAUXHALL, For PAZ, For PEUGEOT/ DFPEUGEOT, For Porsche, For RENAULT, For DACIA, For Saab, For Skoda, For Seaz, For Seat, For Smart, For Transporter&V-Class, For UAZ, For VAZ, For Volvo, For VW/ BINGLEY/ BUGATTI, For ZAZ
China Cars :For Beijing, For Chang'an, For ChangCheng, For Changhe, For Xiaokang, For DR, For ECUAID, For BYD, For Foton, For HaFei, For Haima, For Brilliance, For Jiangling, For Iveco, For JAC, For Gonow, For Xiamen Golden, For Kowloon, For Lifan, For SGMW, For SAIC Chase, For MVM, For Chery, For SAIC&MG, For SGM/ CHCHEVROLET/ CHBUICK/ CHCADLLAC, For GAC Chuan Qi, For Tianjin FAW, For ZhongShun, For ZOTYE, For Zhongxing
America Cars :
For Brazil Fiat, For GM, For CHRYSLER/ DODGE/ JEEP, For GM/ BUICK/ CADILLAC/ CHEVROLET, For Ford/ ChinaFord Lincoln/ EuropeanFord, For vinfast
Asia Cars :
For Daewoo, For Daihatsu, For HONDA/ ACURA/ DFHONDA/ GZHONDA, For Hyundai, For INDIAN MAHINDRA, For INDIAN MARUTI, For INDIAN TATA, For JPISUZU/ TLISUZU, For Kia, For LUXGEN, For Mahindra, For MARUTI, For PERODUA(Perodua), For MAZDA/ YQMAZDA, For Mitsubishi, For NISSAN/ INFINITV/ DFNISSAN, For Perodua, For Proton, For SAIP, For Ssangyong , For Subaru, For Suzuki, For TATA , For TOYOTA/ LEXUS/ TJTOYOTA
Australia Car :
For Holdon
Technical Parameters
| Processor | 2.0GHz 4-core |
| Operating system | Android 10.0 |
| Memory | 4GB |
| Storage | 64GB |
| Battery | 47880mWh(7.6V,6300mAh) |
| Display | 8-inch, 1280*800 |
| Camera | Rear 8MP |
| Connectivity | Wi-Fi (802.11a/b/g/n/ac)/Bluetooth |
| Interface | TYPE A *1 &TYPE C*1 |
| Operating temperature | 0~50℃ |
| Size | 234*166*39.5(mm) |
Ship from EU/UK/Other Overseas Warehouse
LAUNCH X431 IMMO Elite is the Most Comprehensive Key Programming Scan Tool. For users who purchase/use LAUNCH X431 series diagnostic tablet devices for the first time, they need to register an account to use it normally. This article will introduce how to register a LAUNCH X431 account.
1.Network Setup
The tablet has built-in Wi-Fi that can be used to get online. Once you're online, you can register your tool, surf the Internet, get apps, send email, launch the remote diagnosis, and check for software updates etc.
If the chosen network is open, the tablet will connect automatically.
If the selected network is encrypted, a network password will need to be entered.
Note: When Wi-Fi is not required, this should be disabled to conserve battery power.
2.Step-by-step to register and update:
Tap the application icon on the home screen to launch it, and then tap Login to enter the login interface of diagnosis software.
Kindly notice:
If you are a new user, follow A to proceed.
If you have registered to be a member, go to B to login the system directly.
If you have bound a sub-account to this tool, go to C to login the system.
In case you forgot password, refer to D to reset a new password.
A. If you are a new user, tap New Registration to enter the sign-up page.
Fill in the information in each field (Items with * must be filled).
After inputting, tap Register, the following screen will appear:
Input the 12-digit Product Serial Number and 8-digit Activation Code (can be obtained from the password envelope), and then tap Activate
Tap Yes to navigate to the update center to update all available software.
Tap No to ignore it.
In this case, follow steps to check for updates.
Go to Software Update on the Job Menu and tap the Car model tab.
The Car model tab displays a list of vehicle diagnostic software.
Tap Update to start downloading. Once download is finished, the software packages will be installed automatically.
If the user only intends to update the IMMO & IMMO PROG software, go to Software Update and tap the IMMO tab.
Tap Update to start downloading. Once download is finished, the software packages will be installed automatically.
After the registration is successfully complete, the wireless communication between the tablet and the VCI device is automatically established and user has no need to configure it again.
B. If you have registered to be a member input your name and password, and then tap Login to enter the main menu screen directly.
Note: The tablet has an auto-save function. Once the username and password are correctly entered, the system will automatically store it. Next time you login the system, you will not be asked to input the account manually.
C. If you have created a sub-account or bound an existing account to the tool, tap Sub-account login to login.
D. If you forgot the password, follow the steps below to do.
