From Hardware :
ECU Coding：
With this function,LAUNCH X431 PRO3 ACE will improve vehicle performance, customize individual customization, refresh hidden functions, disable the annoying functions, reprograms the adaptive data for certain components after repairs or replacements, customized configurations for high-end models,etc to enhance fuel efficiency and ensure safe driving.
1. Online Coding: this LAUNCH scan tool can directly access the online vehicle repair data to do high-level repairs.
2. Offline Coding: read the code from the original module, and then write the code for the new module,for example ,write a VIN to new ECU.
3. Component Matching: Matching,relearn ,Cali-b-ration, or initia-li-zation adaptive data for certain components after repair or replacements,such as: suspension cali-b-ration ,seat matching ,sunroof initia-li-zation,gearbox matching,injector cali-b-ration, transmission adap-t-ion.Delete Adap-t-ation Data, Tank Cali-b-ration,Height sensor system cali-b-ration,PSM Sensor Cali-b-ration ,etc.
4. Retrofit & Modification: for example, re-t-rofit battery with different type, Upgrading the headlights, taillights, and interior lighting to LED lights,etc.
5. Unlock the Hidden Features: for example, disable auto start-stop, disable daytime running light, disable safety belt chiming ,delete transport mode. delete transmission adaptive value. setting speed limits, etc Note: All above functions are not compatibility with all vehicles, please send car make, year, model, VIN and functions you need to us to check vehicle compatibility.
Audi / VW Firmware Protection Cancel Features: One feature most techs really want is to remove firmware protection from their cars. This feature helps mechanics replace car parts. Carry out car modifications.
2024 New Added OE-LEVEL Advanced Function of LAUNCH X431 PRO3 ACE
√ Guided Functions: Compatible with Volkswagen / Audi / Skoda / Seat etc. √ Component Matching: Compatible with Volkswagen / Skoda / Seat / BMW / GM / Ford / Opel / Mazda / Fiat / Honda / Nissan / Hyundai / Kia / Subaru etc. √ Online Coding: Compatible with Volkswagen / Audi / Benz / BMW / Seat / Porsche etc. √ Online Account Login Service: Compatible with Volkswagen / Audi / Skoda / Seat etc. √ Online Calibration: Compatible with Volkswagen / Audi / Skoda / Seat etc. √ Online Parameterization: Compatible with Volkswagen / Audi / Skoda / Seat etc. √ Anti-theft IMMO Serivce: Compatible with Volkswagen / Audi / Skoda / Seat etc. √ Power Balance: Compatible with Chrysler / GM / Ford etc. Programmable Module Installation: Compatible with Ford / Mazda etc. √ Flash Hidden Functions: Compatible with BMW / Porsche / Toyota / Subaru etc. √ Actuator Test : Injector Test ;Turn Off ACC Lane Keeping Assist System (LKAS) ;Turn ON/OFF Front and Rear side ACM Solenoid , turning the fuel pump on and off, cycling the a/c ,clutch on and off, Left clutch electromagnetic coil test，Acceleration Device Test，Oil Pressure Control Test，DYNAMIC camera aiming，Vehicle level position calibration, Brake Vacuum Pump, Inlet and Outlet Valve tests, Open Brakes tests, Parking Brake Botors, Wheel Speed Sensor Supply, PARKING BRAKE tests (Vary by car, Hundreds of actuation test functions ) … More functions and vehicle coverage is developing and waiting you to discover ........
All in 1 graphic data stream
view and capture (record) real-time Live Data. This data including current operating status for parameters and /or sensor information can provide insight on overall vehicle performance. It can also be used to guide vehicle repair.
3000+ Active Tests
The Car Diagnostic Tool X431 PRO3 ACE features Bi-directional Control, also known as Active Test, Actuator Test, and Inspection Tests. It can send the commands to ECUs, read the ECU data to determine the completeness of the system or parts, and monitor the operation of the actuators,letting you quickly know if a specific system, component, or subsystem is functioning properly or not. Here we have some examples for the A-ctive test: Turn on the radiator fan/modulate the throttle-open/close windows-operate mirrors - test injector buz - turn on interior/exterior lights & sound horn etc.
Power balance Test : Cylinder power balance testing can help uncover hidden engine issues related to engine misfires, lack of power or just a poor running engine, which is commonly missed with other tests. So, cylinder power balance testing, is one of the best and easiest ways to find the source of a engine misfire. Furthermore, cylinder power balance testing is often used along with a cylinder compression and cylinder leakage tests to further pinpoint the problem.
All System Diagnosis:
Read/erase codes,view live data,retrieve ECU version information.It performs active testing and service functions on all systems including ECM, TCM, ABS, SRS, BCM, IMMO, BMS, TPMS, SAS, f uel system, lighting system and A/C system.The functions cover up to 200,000 models worldwide.
ADAS Calibration
Compatible with LAUNCH X431 PRO3 ACE ADAS Mobile to calibrate advanced driver-assistance systems, Operate ADAS calibration to vehicle cameras, LKA system, ACC system, LDW system, and AVM system.
Key Pro-gramming
Add, Delete & Reprogram Keys; Rewrite smart keys; All smart keys lost; Replace smart key ECU; Replace KNOB IGNITION; Reset Key; Relearn a key (Note:this key programming function is NOT universally compatible, please check compatibility with us if necessary. X431 PRO3 ACE supports PINCode reading for most cars before 2008, for vehicles after 2008, you need to have PIN Code to do key p-rogramming.)
Topology Mapping
Checks all system conditions with One-Click, Visualizes the car systems with a diagrammatic tree, Locate the fault in a second show different health status in different colors, save your time!
VAG Guided Functions
for Audi, Volkswagen Skoda and Seat,etc : On-Screen Instruction step by step ,LAUNCH X431 PRO3 ACE Automotive obd2 scanner guide you to be an expert in Car Diagnostics even you are a newbie. Thanks to this function , you don't need to reply on a mechanic's suggestion all the time, No Extra Cost for use.
Programmable Module Installation(PMI)
This intelligent diagnostic scanner supports programmable module installation and programming personalized settings,configuration reading, writing and calibration functions, coding supports more car models, and its accuracy rate is far ahead of competing products.such as VW's online coding, online parameterization, and online matching. The amount of data and calibration functions is ahead of competing products, and the number of support for brushing hidden models and functions is ahead of competing products.
New Function FCA AutoAuth Access Function:
With the newly update on Launch scan tool X431 PRO3 ACE, you now have access to the security gateway module on 2017 and newer Fiat Chrysler Jeep Dodge vehicles.(Note:FCA autoauth requires a paid FCA account to log in directly. If the login fails, you can choose to connect to 12+8 FCA adapter to solve your problem.)
Tons of Online Maintenance Resources
Including How-to Videos, operation skills, DTC Guidances, and user manual, Q&A, Quick start guide, etc,show you how to use diagnostic tool to solve common faults of some models, such as resetting BMW brake warning lights.
Remote Diagnosis &Feedback
When you encounter a complex car issue that is beyond your ability, you can easily get connected with an expert who is NOT physically present to help you fix it by using “Remote Diagnosis”. And if you have some difficulties or find some bugs during the use of this scan tool, you can send “Feedback” messages to LAUNCH technicians. They will handle the issues promptly.
Diagnostic Report Print & Share
With Launch X431 PRO3 ACE car scanner,you can generate a full system Diagnostic Report by ONE-CLICK. The reports can be emailed to the office or directly to your customer. You can also print out the vehicle health report card.
Bi-directional control :
Bi-Directional Control capability and is capable of performing Active Tests to access vehicle-specific subsystems and component tests. The tester outputs commands to the ECU to drive the actuators in order to determine the integrity of the system or parts by reading the ECU data, or by monitoring the operation of the actuators .For example , X431 PRO TT have the ability to actuate relays, injectors, coils, or perform system tests, etc. Also it will actuate solenoids valve and actuators for active testing to identify the error easily moreover. The bidirectional functions are quite extensive. even open an e.g.r. valve and seeing the difference in idle response and oxygen sensor voltage. Please note: Active tests are NOT universal for all vehicles, check compatibility with VIN number before purchase. Active tests vary depending on the manufacturer, year, and model, and only the available tests display in the menu.
Here are some other examples of active tests, which help you locate faults in the shortest time, saving time on troubleshooting:
Injector Buzz Test;
Fuel Pump & Valve Tests;
A/C Compressorclutch Activation;
Turn the Wipers ON/OFF;
Modulate Throttle ON/OFF;
Acceleration Device Test;
41+ Resets functions:
1.ABS Bleeding
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity.
2.TPMS Reset
When due to the tire pressure is too low,tire leaks,tire pressure monitoring device is replaced or installed,tire is replaced and tire pressure sensor is damaged,The tire pressure resetting function must be performed to reset tire pressure and turn off the tire pressure MIL.
3.Oil Lamp Reset
Allows you to perform reset for a new calculation of Engine Oil life system once changed the oil.
4. Electronic Throttle Sensor Reset
To utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state.
5.Injector Coding
After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.
6. SAS Reset
It helps clear the faulty steering angle sensor memories to reset the steering angle and plays an important role in the steering angle sensor calibration.
7.Brake-pad Reset
To deactivating and activate the brake control systems, assist with brake fluid control, open and close brake pads, and set brakes after disc or pad replacement.
8.Gear Learning
Perform gear learning for the car when the engine ECU, the crankshaft position sensor, or the crankshaft flywheel is replaced.
9.IMMO Service
To prevent the car being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use the car.
10.Battery Matching
Enables you to perform resetting operation on the monitoring unit of battery,in which the original low battery fault information will be cleared.
11.DPF Regeneration
It is used to clear PM (Particulate Matter) from the DPF filter through continuous combustion oxidation mode. Specially works for Diesel Particulate Filter system with DPF.
12.EGR Adaption
This function is used to learn the EGR (Exhaust Gas Recirculation ) valve after it is clean or replaced.
13.Suspension Matching
When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, this function can adjust the body height sensor for level calibration.
14.NOx Sensor Reset
If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.
15.Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
16.Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory.
17.Stop-start Reset
This function is used to open or close the automatic Start/Stop function via setting the hidden function in ECU (The precondition is the vehicle equipped with hidden function and hardware support)
18. AC Initialization
AC system relearn/initialization must be performed when the vehicle AC ECU or actuator is replaced or the ECU memory is lost.
19. AdBlue Reset
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, the urea reset operation is required.
20. AFS Headlamp Reset
This function enables you to initialize the adaptive headlamp system.
21. A/F Reset
This function is applied to set or learn air/fuel rate parameters.
22. Gearbox Reset
This function enables you to complete the gearbox self-learning to improve gear shifting quality
23. Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
24. Transport Reset
To lower vehicle power consumption, user may perform the following operations: limit vehicle speed, not wake up the network for door open and disable remote key, etc. In this case, deactivating the transport mode is needed to recover the vehicle being normal.
25. Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
26. High Voltage Battery Detection
This function is used for high voltage battery diagnosis and status information detection.
27. Sunroof Initialization
This function enables you to set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car ,etc.
28. Engine Power Balance Monitoring
This function is used to monitor crankshaft acceleration in the power stroke of each cylinder, to determine the relative power provided by each cylinder.
29. Language Change
This function is used to change system language of vehicle center console.note:you need to have language pack to do language change
30. Gas Particulate Filter (GPF) Regeneration
This function is used to perform the GPF replacement or regeneration after the fuel consumption is increased and engine output power is reduced resulting from a long time service of the GPF.
31. Intelligent Cruise Control System Reset
32.Camshaft/Crankshaft Sensor Relearn
33. Interactive Vehicle Dynamics (IVD) Initialization Sequence.
34.Fuel Economy Test
35.Halt/Resume Transmission Adaptive Learning.
36.Passive Anti Theft System(PATS)Functions
37.Relearn Vehicle Data
More...........
Supports CANFD and DIOP protocol:
it is the only product in this price range that is compatible with CAN-FD protocol and supports the latest For GM vehicles manufactured after 2020. Adopts advanced CRC algorithms to accommodate more data from 8 to 64 bytes in the CAN frame, which runs faster than other products and reduces the risk of undetected errors to greatly enhance the user experience.
DOIP：
With Diagnostics over DoIP, diagnostics introduced over UDS are used over TCP/IP and Ethernet. This enables much higher data rates than with CAN. That makes LAUNCH X431 PRO3 ACE save both in terms of time and expenses in the case of complex diagnostic tasks and flash applications. Compatible with BMW (F&G chassis), Volvo models (2018 later), Land Rover & Jaguar models (2017 later).
Tips:
( Note : this is car list that CANFD and DIOP supports , X431 PRO3 ACE also supports other cars , more than about 100+ brands , like for bmw , for vw , for ford etc , there has the detailed car list in the following description , you can check ）
2023 New Function AutoAuth Access: Bypass SGW in FCA Vehicles
you now have access to the security gateway module on 2018 and newer Fiat Chrysler vehicles, so that the diagnostic tool can clear codes, run bi-directional active tests, actuations, relearns or even IMMO key programming (pulls PIN & write), ADAS calibration assistance etc.
*Note: Update to get this new Function. Since November 23, 2022, all FCA-supported regions will require an account purchase to log in AutoAuth. The payment is charged by AutoAuth directly. LAUNCH is not involved in any transaction process. Reach us for more detail.
Full 10 Mode OBDII/EOBD/JOBD Car Diagnostics Functions:
1.Reading Codes:Show the detailed description of the Diagnostic Trouble Code (DTCs)
2.Erasing Codes & Reset:Turns off Check Engine Light (MIL), clears codes and resets monitors.
3.Data Stream:Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4.I/M Readiness Status:Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5.Read Live Data Stream:Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.View Freeze Frame Data:Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7.O2 Sensor Test:Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8.On-Board Monitor Test:Retrieves and displays test results for emission-related powertrain components and systems
9.Read Vehicle Information:Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10.Component Test:Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
Remote diagnosis:
Remote diagnosis can realize real-time communication between equipment and equipment or equipment and computers, complete remote diagnosis of vehicles, and make it a reality for repair technicians to diagnose vehicles thousands of miles away.
Anto VIN
Through "smart diagnosis", you can quickly read the vehicle VIN code, quickly enter the diagnosis, and check the historical diagnosis records
Extra functions:
IMMO Function: LAUNCH X431 PRO3 ACE scan tool has the immo function which is similar to x431 V's anti-theft key car model. It can add a new key and disable the lost car keys,but only covers some 3.5th gen. Volkswagen, Audi, Skoda, Seat, and some Asian cars.
4 in 1 Live Data Stream: The scan tool X431 PRO3 ACE scan tool shows you live sensors data and provides data graphing for intuitive diagnostics and monitoring your vehicle performance, help customers to better analyze the abnormal parameter.
Data Recording Functionality is convenient, customer can record the live data stream for up to 4, simultaneous, PID's. Once these have been recorded they can be played back in text format and/or graph format.
Data Playback supports two graphs (independent) or 4 PID's graphed (combined). Playback timeline can be scrolled, paused, viewed, etc. There's quite a bit of power in the graphing.
One Click to Generate Report: Launch X431 PRO3 ACE obd2 scanner support auto generate and store vehicle diagnostic report which can let your mechanic know how to do vehicle inspection and maintenance.
Print and Share Report: The diagnostic report can help you save time to analyze the problem, it is very great for repair shop , mechanics can print out the vehicle report for customer.The diagnostic report can be shared to email.
Displays Error Codes With Explanations:Click on the “Code Search” icon to dig more. It will switch to Google to show you more analysis of trouble codes, reasons why such faults occur, and even YouTube links.
With Online DTC Code Search: Search the DTC definition on “Google” for more online help & tips.
NICE & PERFECT GIFT IDEA-FOR YOUR FAMILY,FRIENDS,COLLEGUES！
Compatible with a Wide Range of Vehicles:
200000+ Vehicles Supported & 200+ Car Makers + CANFD & DOIP+FCA
When choosing an car scanner diagnostic for all cars, one of the most important considerations is how compatible it is with different vehicles. This LAUNCH diagnostic tool has expend vehicle coverage, being well-matched with over 99% of popular cars from America, Europe, and Asia, even the most recent models up to 2024,including cars, SUVs, minivans, 12v light-duty trucks...Compatible with X-431 SMARTLINK C HD Module module, support DC9~36 V & 24V HD Truck,such as: Benz, Man, Volvo, Daf, Scania, Iveco, Renault..
Amarica Car Models: For FORD LINCOIN GM BUICK CADILLAC CHEVROLET CHRYSLER DODGE JEEP HM TESLA...
Europe Car Models: For BENZ SMART SPRINTER BMW VW SKODA AUDI OPEL LAMBORGHINI PORSCHE MAYBACH EUROFORD LANDROVER DR BENTLEYROLLSROYCE ROVER MINI VAUXHALL FERRARI FIAT ABARTH LANCIA ALFA ROMEO MASERATI BUGATTI PEUGEOTCITROEN RENAULT SAAB VOLVO OPEL DACIA SEAT...
ASIAN Car Models: Fit for SAMSUNG DAEWOO SSANYYONG HYUNDAI KIA HONDA Acura TOYOTA SCION LEXUSMAZDA NISSAN Infiniti JPISUZU TLISUZU DAIHATSUSUZUKI MITSUBISHI SUBARU CHANGCHENG HUACHEN ZHONGXING JACTY QIRUI_TY ISUZU JINLONG CHANGAN LIUWEI_TY XINKAI JPISUZU ZHONGSHUN HAOQING HAFEI XIALI CHANGHE ZHONGTAI Kowloon Brilliance LIFAN WEILI FLYER SSANGYONG JIAO WEILI LUXGEN BYD CHERY ZOTYE...
Malaysia Car Models: Fit for PERODUA(PERODUA),PROTON ; IRAN Car Models: Fit for IKCO,MVM,SAIPA;
Australian Car Models: Fit for Austford, Holden ;India Car Models: Fit for TATA,MARUTI,MAHINDRA,India HM ;
Russia Car Models: Fit for GAZ, VAZ; Brazil Car Models: Fit for FIAT; GM [CONTINUOUSLY GROWING Vehicle Coverage WITH UPDATES ]
Car VII Bluetooth diagnostic connector
X431 PRO ACE parameter：
OS: Android 10.0
Processor: 2.0GHz, quad-core
Memory: 4GB
Storage: 64GB
Display: 10.1 inches, LCD screen
Resolution: 1280*800
Camera: rear 8 million pixels
Wi-Fi: 2.4GHz/5GHz
Battery: 6300mAH 7.6V
Working temperature: 0℃～50℃
Size: 435×305×372（mm）
LAUNCH X431 PRO3 ACE Packing list
1pc x X431 PRO3 ACE
1pc x DBScar VII
1pc x B-20 adapter
1pc x TA-22 adapter
1pc x K-20 adapter
1pc x HA-3 adapter
1pc x GV-12 adapter
1pc x CR-6 adapter
1pc x AT-17 adapter
1pc x BENZ-38 adapter
1pc x NN 14+16 adapter
1pc x MH 12+16 adapter
1pc x BZ 14+16 adapter
1pc x FD 6+1 adapter
1pc x data cable
1pc x power adapter
1pc x UK-standard adapter
1pc x EU-standard adapter
1pc x main cable
1pc x lighter
1pc x power cable clamp
1pc x password letter
2pcs x packing list
1pc x manual
Ship from EU/UK/Other Overseas Warehouse
In addition to the latest Smartlink, LAUNCH diagnostic tool adapters also include DBscar VII. Currently, the main products using DBscar VII are: X-431 PRO3 ACE, X-431 PRO3 APEX, X-431 PRO3 (V5.0), X-431 PRO TT, X-431 PRO DYNO. This article will compare the differences between these products (Although the PRO3S+ (V5.0) has replaced the Smartlink, the functions are basically the same, so we also include it in this comparison).
Note: PRO3 ACE and PRO3 APEX are the same products customized by different dealers, with the same hardware and functions, and can be regarded as the same product (similar to CRP919E BT and CRP919X BT).
| Item | Launch X431 Pro3 ACE (PRO3 APEX) | Launch X431 Pro3 (V5.0) (V+ 5.0) | Launch X431 Pro3s+ (V5.0) | Launch X431 Pro TT | Launch X431 Pro Dyno |
| Image |  |
 |
 |
 |
 |
| Screen | 10.1 inch 1920×1200 | 10.1 inch 1920×1200 | 10.1 inch , 1280×800 | 8 inch , 1280×800 | 8 inch , 1280×800 |
| Operating system | Android 10.0 | Android 10.0 | Android 10.0 | Android 10.0 | Android 10.0 |
| Processor | 4-Core 2.0GHz | 4-Core 2.0GHz | 4-Core 2.0GHz | 4-Core 2.0GHz | 4-Core 2.0GHz |
| ROM | 4G | 4G | 4G | 4G | 4G |
| RAM | 64GB | 64G | 64G | 64G | 64G |
| Battery | 6300mAh/3.8V | 6300mAh, 7.6V | 6300mAh, 7.6V | 6300mAh, 7.6V | 6300mAh/3.8V |
| Camera | Rear 8.0 MP | Rear 8.0 MP | Rear 8.0 MP | Rear 8.0 MP | Rear 8.0 MP |
| WiFi | 2.4 & 5 GHz | 2.4 & 5 GHz | 2.4 & 5 GHz | 2.4 & 5 GHz | 2.4 & 5 GHz |
| VCI | DBScar VII | DBScar VII | Smartlink | DBScar VII | DBScar VII |
| Language | 24 languages | 24 languages | 24 languages | 24 languages | 24 languages |
| CAN FD | Yes | Yes | Yes | Yes | Yes |
| DoIP | Yes, need DoIP cable | Yes, need DoIP cable | Yes, need DoIP cable | Yes, need DoIP cable | Yes, need DoIP cable |
| FCA Autoauth | Yes | Yes | Yes | Yes | Yes |
| Autovin | Yes | Yes | Yes | Yes | Yes |
| Full system diagnostic | Yes | Yes | Yes | Yes | Yes |
| Bi-directional control | Yes | Yes | Yes | Yes | Yes |
| ECU Coding | Yes | Yes | Yes | Yes | Yes |
| Special functions | 37 | 37 | 37 | 37 | 37 |
| VAG Guided function | Yes | Yes | Yes | Yes | Yes |
|
Online Programming |
No | No | No | No | No |
| Offline programming | Yes, Ford, Mazda, Vauxhall, Opel | Yes, Ford, Mazda, Vauxhall, Opel | Yes, Ford, Mazda, Vauxhall, Opel | Yes, Ford, Mazda, Vauxhall, Opel | Yes, Ford, Mazda, Vauxhall, Opel |
| Flash Hidden Function | Yes BMW, Benz, VAG, Porsche, Jeep, Chrysler, Dodge, Toyota, Honda | Yes BMW, Benz, VAG, Porsche, Jeep, Chrysler, Dodge, Toyota, Honda | Yes BMW, Benz, VAG, Porsche, Jeep, Chrysler, Dodge, Toyota, Honda | Yes BMW, Benz, VAG, Porsche, Jeep, Chrysler, Dodge, Toyota, Honda | Yes BMW, Benz, VAG, Porsche, Jeep, Chrysler, Dodge, Toyota, Honda |
| Topology mapping | Yes | Yes | Yes | No | No |
| X-prog3 module | Yes | Yes | Yes | Yes | Yes |
| Truck module | Yes with HDIII or smartlink C 2.0 |
Yes with HDIII or smartlink C 2.0 | Yes with HDIII or smartlink C 2.0 | No | No |
| TPMS TSGUN/i-TPMS | Yes | Yes | Yes | Yes | Yes |
| Battery tester | Yes | Yes | Yes | Yes | Yes |
| Videoscope | Yes | Yes | Yes | Yes | Yes |
| ADAS | Yes | Yes | Yes | Yes | |
| Sensorbox | Yes | Yes | Yes | Yes | |
| Oscilloscope | Yes | Yes | Yes | Yes | Yes |
| WiFi printer | Yes | Yes | Yes | Yes | Yes |
| Update | 2 years free update | 2 years free update | 2 years free update | 2 years free update | 2 years free update |
From the chart we can see:
Pro TT and Pro Dyno are 8 inch tablets, Pro3 ACE, Apex, Pro3 V5 and Pro3s+ V5 are 10 inch tablets (there is a small rule for LAUNCH tablet devices, the higher the product, the larger the size, and the 10.1-inch PRO3S+ product is positioned higher than the 8-inch product).
They all support CAN FD and DoIP protocol (DoIP requires a DoIP cable).
They all cannot do online programming (no smartlink VCI).
Pro TT and Pro Dyno 8 inch tablets are not compatible with heavy duty modules, and do not support Topology mapping.
The new Pro3 V5.0 (aka V+ v5.0) now shares the same functions as Pro3s+ V5.0. Only appearance difference.
