Product Description
- PAD VII With XPROG3 can do advanced key programming & IMMO service, can supports key programming, immo, engine and gearbox replacement, you can retrieve ECU information, read, erase, and write in for a range of chips
- Package offer saves you money than buying them alone, We can offer you 5 years warranty, lifetime customer service, and tech support.
- Connect the MCU3 adapter to X-PROG3, you can read new ECUs TCM or program Mercedes all keys lost.
Launch PAD7 Elite Scanner With X431 GIII XPROG3 Programmer and MCU3 Kit Adapter
Launch X431 PAD7 Elite
X-431 PAD VII is an unexpected high-end diagnostic, comes with a 13.3 inch large touch screen, 32 service functions and Smartlink remote diagnosis. Equipped with the 2.0GHz Octa-core optimized chipset, Android 9.0 operating system, 8G memory and 256G large storagememories, X- 431 PAD VII makes your intelligent diagnosis faster than ever. The precision-machined outer shell is designed to work against workshop hazards such as water and dust damage and in compliance with IP65.
The X-431 PAD VII uses a high-capacity (about 19,000 mAh) and high power battery to ensure a longer battery life but a shorter charging time. Moreover, X-431 PAD VII improves the connection between scanner and VCI into 'Dual WiFi' connectivity, which allows the VCI to maintain faster and stable connection during diagnostics.
X431 PAD VII Elite Highlights
From Hardware :
- Android 9.0 KitKat ensures rapid boot-up in just seconds and smooth multitasking.
- IP65 Rating effectively withstands low-pressure jets of water from all directions without any harmful effects.
- 8GB+256GB onboard memory, ideal for storing materials. smoother operation; strong light readable screen; support for three defenses
- Its Sleek & Lightweight Tablet-style design features a capacitive touchscreen that responds to your every gesture.
- Powerful 8-core Cortex-A53 Processor (2GHz) enhances the speed of your programming and diagnostics.
- Wireless scanning capability and dual 2.4&5GHz Wi-Fi connection. Connect effortlessly and work from any location in the service bay
- The rechargeable lithium-polymer battery with an capacity of 18,720Ah enables continuous operation for up to 20 hours.
- 5G WiFi Communication automatically connects within 20 meters, far better than traditional BT connection in transmission rate, diagnostic
- 13.3" (1920*1080) Touchscreen, Experience a visually stunning view with the large and Ultra-sharp while the Gorilla Glass provides outstanding scratch resistance.
- 180° Adjustable Kickstand allows for more convenient viewing angles, hands-free operation, and space-saving. It also prevents the diagnostic tool from tipping over or sliding on smooth surfaces.
- Launch “ Mall ” Newly released European Professional Software License: FCA, Mercedes, Renault,Haynes pro/X431 FIX/CarSET PRO How to Purchase >>>
From Software:
- Free update online for 2 years, €505 per/year later
- With Smartlink C 2.0 VCI, Support Remote Diagnosis ( Requires Activation card )
- NEW Protocols to support the vehicles of today and tomorrow: DoIP, CAN-FD, D-PDU, J2534, RP1210.
- Online Programming for Car Brands: BMW, Mercedes, VW, Audi, Seat, Skoda, Porsche, Nissan, Infiniti, Subaru.
- According to function, Launch tool sequence: X431 PAD7 Elite> PAD5 >PAD3 >PRO5 >X431 V+> PROS V>PROS MIN
- 8 Extended Modules: such as ADAS calibration toolkit; VSP-600 videoscope; X431 TMS TSgun; BTS360 battery tester; X-PROG & X-PROG3 immobilizer, etc.
- [Support 110+ car brands] with 99.99% worldwide car coverage. Coverage for U.S., Asian and European Markets Include Australian Ford and Holden, Brazilian, Indian and Malaysian cars
- [Multi-Language Supported] English, French, Spanish, German, Russian, Korean, Japanese, Portuguese, Italian, Polish, Dutch, Hungarian, Finnish, Czech, Turkish, Greek, Arabic, Danish, Romanian, Serbian, Swedish, Traditional Chinese, Thai, Persian, Simplified Chinese,Hebrew, Croatian
- [All-in-One Tool for Diagnoses and Inspections ] High-end ECU programming backup/restore for ECU/SCN coding, topology mapping, 60+ service functions, guided functions, read and clear DTC, remote diagnosis, Bi-directional control, live data graph, wireless software update etc.
- [LAUNCH X431 PAD VII ELITE, Focus on the Customer ] : LAUNCH X431 PAD VII ELITE features diagnostic feedback which allows you to send problems to us for analysis. It also offers many repair guidance options including operation tips/relevant cases for your reference. As the biggest reliable & authorized LAUNCH seller, we offer you original LAUNCH X431 PAD VII ELITE, which comes with 2-year free update, and 24/7 tech support. Contact us via sales@X431shop.eu
X-431 PAD VII Elite Main Functions
- Support EPB function
- VAG Guided Function
- Support Super remote diagnosis. Click here to activate
- Clone Mercedes Benz ECU 2015 upwards with X431 XPROG III.
- Intelligent diagnostic enable identify VIN automatically and access system quickly
- Build-in repair information and training video modules help to track and fix issue fast.
- FCA AutoAuth Access: Bypass SGM in FCA vehicles seamlessly and within seconds; Need AutoAuth subscriptions
- Gain Renault SGW diagnostic access by using optional unlocking software and device. (How to unlock Renault SGW).
- Auto-detects the communications protocol of the vehicle and assist to check automotive OBDII port pin damaged or not
- Online Programming: BMW, Benz; Offline Programming: VW, Audi, Seat, Skoda, Renault, Nissan, Subaru, Hyundai, Kia, Chery, Jaguar, Land rover, Porsche
- Now online programming function is available in the North American region. (How to activate online programming function on PAD VII)
- Supports ADAS calibration and eight extended modules such as videoscope, oscilloscope, sensor box, TPMS tools, key immobilizer, and battery tester.
- [60+ advanced Services] LAUNCH X431 PAD VII ELITE bidirectional scan tool has 60+ service functions, like Oil Reset/ABS Bleeding/Injector Coding… to win more business.
- With Smarlink C Empower technician to diagnose light, medium and heavy duty vehicles; SmartLink C VCI (also as J2534-1 & -2 Pass-thru device) allows you to refresh ECU and upgrade OE software.
- [Intelligent Diagnose & Guided Functions ] LAUNCH X431 PAD VII ELITE scan tool has Intelligent Diagnose to free you from tedious works: easily get VIN data, guide you to vehicle information page without menu selection, and display all diagnostic records. Guided Function (for V.A.G) allows on-screen prompts for proper diagnostics, simple & convenient. Pin Detection allows detecting DLC pins voltage and accessing protocol types to troubleshoot your DLC port.
- [Huge-Upgraded ECU Programming & Coding] Beyond the reach of most competitors, LAUNCH X431 PAD VII ELITE features ECU Programming working on upmost 30+ car brands: 1) Backup/Restore data from original ECUs, you won't find this in any other tools; 2) Programming offline or online, manual or automatic to meet more needs; 3) R-etrofit, e.g. replace halogen lamp. 4) ECU Upgrade, e.g for Fuel quality d efect firmware. Coding features: Recode ECU Data, Personalization, and loads of more.
- [Topology mapping] checks DTCs and all-system communication status visually in LAUNCH X431 PAD VII ELITE top scanner. The actuation test detects problems 5X faster than tearing autoparts apart. Topology mapping checks DTCs and all-system communication status visually in LAUNCH X431 PAD VII ELITE top scanner. The actuation test detects problems 5X faster than tearing autoparts apart. Multiple protocols: J2534, RP1210/D-PDU (for HD cars), Do-IP (BMWs E/F, Land Rover/Jaguar), CANFD (new GM).
- Supports Benz, Porsche, Skoda, Seat, Sprinter, Nissan infiniti, Hyundai, Kia, Chery, Geely online programming till 2023. Part of Renault till 2021, Subaru till 2022, Ford/Mazda till 2019, Audi, VW, BMW, Smart till 2024
Supports Extended Function Modules:
- Launch motorcycle connector kit: For diagnose motorcycles
- X-431 Wi-Fi Printer: print out diagnostic data & reports.
- VSP-600 VideoScope: for up-close visual inspections in confined areas.
- X-431 TSGUN: activate all sensors, relearn & program LAUNCH sensors.
- With Smarlink C Empower technician to diagnose light, medium and heavy duty vehicles
- BTS360 Bluetooth Battery Tester: get a thorough test of the vehicle battery.
- Truck software: Supports gasoline cars and diesel heavy-duty trucks (need to purchase truck software separately)
- S2-2 SensorBox: diagnose and simulate vehicle sensor faults quickly.
- O2-2 ScopeBox, Oscilloscope: quickly acquire the circuit signal, and slowly display the waveform to observe and analyze.
- X-PROG & X-PROG3 Immobilizer: for key programming & IMMO service. Clone Mercedes Benz ECU 2015 upwards
- Launch X431 Key Remote Maker Able to read Transponder, Generate Transponder, Detect Frequency, Detect Ignition switch coil signal, Generate Remote and Unlock Toyota smart key, etc functions.
- Buy Launch X431 X-PROG 3+ IMMO Function Service X431 PAD VII Elite will have the same immobilizer function as X431 IMMO Plus or IMMO Elite.
- Launch X431 EV Diagnostic Upgrade Kit : Supports New Energy Battery Diagnostics. Includes activation card and adapters for specific electric vehicles to perform battery pack analysis. Can diagnose battery pack State of Charge and State of Health on Tesla, BYD and many other electric vehicles.
Newly Added Functions:
- NEW! Adds CAN Analyzer
- NEW! Adds Launch X431 key programmer for remote generation
- NEW! Adds EV diagnostic kit for new new Energy Battery vehicles
- NEW! Adds "X-431 FIX" function (Need to purchase from Mall)
- Online ECU Programming: Easily reprogram ECU modules on 30+ vehicle brands.
- Topology Mapping: Visually show you all system relationships and DTC in color topology.
- Diagnostic Plan: Provides a plan to guide you on how to repair based on the currently detected fault codes.
- NEW Remote Diagnosis asking for expert help even thousands of miles away.
- Gain Renault SGW diagnostic access by using optional unlocking software and device.
- User Information: A large amount of diagnostic data is well stored in this module, including Reports, Order, Live Data Stream, etc.
- OBD PIN Detection: Detect the vehicle protocols and OBDII pin voltage status to help technicians judge the OBD2 interface.
- 3-in-1 SmartLink C Device: Work as VCI to obtain vehicle data; Provide dual diagnostic modes; Act as a J2534 programming device.
- PAD VII Can Support ADAS Calibration, But Clients Need To Buy the ADAS Devices To Make It. Without ADAS Devices, Can Not Do ADAS Calibration by PAD VII Only
View more About PAD VII click here>>>
Launch X431 X-PROG 3
X-431 GIII X-PROG 3 Highlight
- LAUNCH Official authorized dealer, 100% original
- Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
- Supported models: 60+ brands in America, Europe and Asia. More models and systems continue to be updated.
- Supported brands: VW, AUDI,Porsche,SKODA, SEAT, BMW, MERCEDES BENZ, TOYOTA, Opel, Renault, PSA, Fiat and more continue to be updated
- For advanced key programming, you can check optional extended IMMO software, all vehicle manufacturers will be available (over 100 other brands).
- X-431 GIII X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read and write keys to the vehicle.
- Compatible with Multiple X-431 Series Diagnostic Tablet (PRO Elite, X-431 V, X-431 V+,X431 PRO3, X431 Pro5, X431 ProS, X431 Pro3s+,X431 PAD III, X-431 PAD V, X-431 PAD VII, Immo PAD, Immo Pro, Immo Plus,Immo Elite, X-DIAG Pro3 etc)
X431 X-PROG G3 Main Functions:
- Supports MQB.
- All-in-One Key Programmer. Integrates Multiple Function Models.
- Reads & Writes Most Engine/ Gearbox ECUs Without Disassembling the Shell
- Supports VW/ AUDI MQB Platform Engine ECU Replacement or Cloning (Read engine ECU data directly from the key).
- Works with Reprogramming Device to Backup/ Restore Programming Data (For Bosch/Siemens engine ECU).
- Update VAG MQB NEC35XX D70F3524, D70F3525, D70F3526, D70F3529, D70F3532, D70F3537 add key & all keys lost NEW!!!
- X-PROG 3 enables reading and writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine INS code.
- X-PROG 3 enables anti-theft type identification, remote control matching, key chip reading and matching, anti-theft password reading and anti-theft component replacement.
- More than just key programming — The LAUNCH XPROG 3 also supports advanced coding/programming functions: - ECU replacemetn for 4TH Generation Audi (0AW/0B5) gearboxs. - Reading, writing & cloning of the ECU for 4TH Generation VW UDS engines. - BMW E chassis 8HP gearbox ECU program wiping,.etc.
XPROG3 Advantage Functions
1. Read BMW engine ISN code.
2. Read/write BMW CAS4+ and FEM chips.
3. Read/write Audi fifth-generation steering column chips
4. Read/write EEPROM.
5. Read/write MCU.
6. VW Fourth-generation Dump Mode All Keys Lost.
7. Read engine in BENCH mode.
8. Read gearbox data.
9. Supports VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
10. Supports VW/AUDI MQB platform gearbox ECU replacement or cloning.
11. Supports ECU replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
12. Supports reading, writing & cloning the ECU for the fourth-generation of VW UDS engine.
13. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
14. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU)
etc.
Launch X431 G-3 Core Functions
- Supports the BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
- Supports the BMW CAS4/ CAS4+ module replacement.
- Supports the ECU cloning and replacement for BMW Siemens engines.
- Supports ECU replacement for the fourth-generation of VW/AUDI engine;
- Supports ECU replacement for the fifth-generation of VW/AUDI Bosch and Siemens engines.
- Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable ECU, and KESSY IC.
- Erase the password for Mercedes-Benz engine and gearbox within 3S.11.
- Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
- Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
- Supports common ECU/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
- Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
Extended function
Use with
MCU3 adapter to do Benz All Keys Lost and ECU TCU Reading.
Use with
Launch RH850 Adapter for Renesas Encrypted RH850 MCU Read and Write
Use with
Launch ECU Bench Adapter for Renesas Encrypted RH850 MCU Read and Write
Use with
X431X-PROG3 PC Adaptor Support Read/Write ECUs Data And Engine Data Validation
Use with
Gearbox Cloning adapters Faster connection without mcu3 adapter or a bundle of adapters.
Use with
Toyota emulator key: can collect the data sent from the ignition coil, aiming to identify the ignition coil troubles and decode the data of the vehicle key chip.
Use with
Toyota 27 pin smart key AKL cable Support For Toyota 4A, 8A-A9, and 8A-AA smart keys all lost (dismantle and read the immobilizer box)
Use with
Toyota H non-smart key AKL cable Program Toyota 8A mechanical keys all lost. The applicable models are: 2014 onwards Corolla, Levin, Camry, Highlander, and Prado
Use with
Toyota 24-pin smart key AKL cable Support Dismantle And Read The IMMO Box for F15/F18 smart keys, 2019 onwards such as Highlander, Alphard, and Vellfire, equipped with TMLF12 smart box
Use with
X431 Key Remote Maker support to Read Transponder, Generate Transponder, Detect Frequency, Detect Ignition switch coil signal, Generate Remote (Launch X431 remote), and Unlock Toyota smart key, etc functions.
Launch X-prog3 compatible keys:
1. Original Keys (OEM keys)
2. Launch dedicated universal remote keys
3. Xhorse Autel Keydiy universal keys (generated by corresponding remote makers.)
Note:
- X-PROG 3 can only do ECU TCU Cloning and IMMO for German cars; If you want to do advanced key programming, you need to Activate the Authorization of IMMO package.
View more About Launch GIII X-PROG 3 click here>>>
Launch IMMO Programmer MCU3 Adapter Board Kit
- Adapter board code: 307140131
- LAUNCH 100% original immobilizer programmer MCU3 kit.
- Launch MCU3 Adapter is used to Mercedes-Benz all keys lost and ECU TCU reading
- Work with XPROG3/GIII, which is compatible with X431 PRO, X431 PRO 3, X431 PRO 5, X431 PAD III, X431 PAD V, X431 PAD VII, X431 V, X431 V+, X431 PRO 3S+.
Applications and advantages of the new MCU3 adapter
- ADAS Advanced Driving Assist System
- Audi VW MQB gearbox replacement
- Equipment configuration: non-standard accessories, optional.
- BMW continental msv90 engine ecu replacement and cloning
- Peugeot Key Programming
- Mercedes Benz transmission deleted and operating instructions vgs nag2 vgs2 nag2 and vgs3 nag2
- Mercedes Benz w164 2009 Key Programming
- Volkswagen Audi 5th generation engine reading engine data via direct connection and online programming and coding
- For BMW E chassis 8hp EGS deleted
- BMW 8hp chassis F and G delete function
- Key programming cas4/cas4+ all keys lost and adding keys
- Programming cas1 cas2 cas3 cas3+ lost keys and add key
- CAS4 immobilizer module replacement
- Replacement of Volkswagen Audi engine and reading data med17 and edc17
- Mercedes Benz med9.7 ecu deleted
- Volkswagen Audi Replacement 4th Generation Instrument Replacement
- Engine replacement for Volkswagen Audi MED17.5.22
- Programming of lost keys and adding key Porsche Cayenne 2011 2017
- Cloning and virginization e39 ac delco
- Power shift cloning and virginization
- Nissan ecu and Tcm conversion and virgin ecu programming and calibrations
- Special features in Chrysler and registration at autoauth FCA sgw
- Special features in GM and Ford
View more About Launch MCU3 adapter click here>>>
Package List:
1Set x LAUNCH X431 PAD Ⅶ Elite
1set x LAUNCH X431 XPROG 3 and Adapter
1set x XPROG3 IMMO programmer MCU3 adapter board kit
Ship from EU/UK/Other Overseas Warehouse
- Normally take about 3-5 working days to arrive
- Valid for EU/UK Local Address Only - Only Item title marked "EU/UK SHIP" will ship from EU/UK warehouse!
- EU Warehouse was located in Germany/Czech and it only can ship to EU country:
Germany, France, Spain, Netherlands, Finland, Sweden, Austria, Belgium, Bulgaria, Croatia,
Czech Republic, Denmark, Estonia, Greece, Hungary, Ireland, Latvia, Lithuania,Luxembourg,
Malta, Poland, Portugal, Republic of Cyprus, Romania, Slovakia, Slovenia - Note: If EU/UK Stock sold out, your order will be shipped from China via DHL or YANWEN (No Tax) by default.
For any question, please contact us at:Click to join the X431shop.eu Tech Support WhatsApp Group